If you own a pool anywhere from Hunters Creek to St. Cloud, you already know that Kissimmee summers are brutal on plaster. With average August highs around 90.5°F and roughly 52 inches of rain a year, our pools run nearly year-round and the finish takes a beating long before pools in cooler states ever would. That constant use is exactly why so many Osceola County homeowners start pricing out a resurface every 7 to 12 years. Here is what those numbers actually look like in 2026.
Most Kissimmee pool resurfacing projects run between $4,000 and $7,000 for a standard residential pool. Basic plaster sits at the low end, while premium pebble or quartz finishes push toward $9,000 to $12,000 on larger pools. Structural repair, tile, and salt systems add cost.
Three local factors move your quote more than anything else. First, pool size: a typical 450-square-foot interior costs far less to coat than a 700-square-foot screen-enclosed pool common in Celebration and Hunters Creek. Second, the finish you pick. Third, hidden structural work. Kissimmee sits on sandy soils over soluble limestone, and a high water table means hollow spots and hairline cracks in the shell are common. If a chip-out reveals delamination or rebar showing through, expect $500 to $2,000 in patching before any new finish goes on. Homeowners in Poinciana with older shells see this more often than newer builds.
Finish choice is the single biggest lever. Standard white plaster (marcite) is the cheapest up front, usually adding $4,000 to $5,500, but it only lasts 7 to 10 years in our UV-heavy climate. Quartz finishes run roughly $5,500 to $8,000 and stretch lifespan to 10 to 15 years. Premium pebble finishes like Pebble Tec land at $7,000 to $12,000 but routinely last 15 to 25 years, which makes the cost-per-year the lowest of the three. For the math behind that trade-off, see our Pebble Tec vs. quartz vs. plaster comparison built specifically for Kissimmee water.
The base resurface is rarely the whole job. Waterline tile replacement typically adds $1,500 to $4,000 depending on linear footage. A new salt-chlorine generator pairs best with pebble or quartz and adds $1,200 to $2,500. Acid washing, drain valve replacement, and refilling 15,000-plus gallons of city water during a Davenport summer all add line items. We always itemize these so homeowners in Davenport and Celebration can compare apples to apples instead of a single lump sum.
We start every estimate with an on-site shell inspection rather than a phone quote, because Osceola County’s soil and water table make sight-unseen pricing unreliable. You receive a written, itemized estimate that separates the finish, structural repairs, tile, and equipment so there are no surprises on invoice day. We also walk you through the cost-per-year of each finish so the cheapest sticker price does not become the most expensive choice over a decade. Reach out through our service pages to schedule a free, no-pressure measurement.
Expect $4,000 to $7,000 for a standard plaster resurface, and $7,000 to $12,000 for premium pebble finishes on larger pools. Structural repair and tile work are extra.
Year-round use, intense UV, and hard groundwater wear finishes faster, so Florida pools need premium materials and more frequent structural patching, which raises the average project cost.
For most owners, yes. Pebble lasts 15 to 25 years versus 7 to 10 for plaster, so the cost-per-year is actually lower despite the higher up-front price, especially under our heavy UV load.
Yes. Resurfacing is priced largely by interior square footage, so a 700-square-foot Hunters Creek pool can cost 40 to 60 percent more than a compact 450-square-foot pool.
Fill out the form and our team will get back to you quickly.